BUILDING CHEMICALS

Bostik Non-Pressure Pipe Cement is a thixotropic solvent cement conforming to BSI specification BS EN 14680 for non- pressure pipe. The product is independently tested to the standard by BSI and carries both Kitemark and CE marking. The product is also approved by the Water Regulatory Advisory Service Scheme to BS EN 6920-1 for use with potable water.

EVO STIK EVOSET frostproofer and rapid hardener is designed to accelerate setting of mortar and concrete and aid the attainment of high early strength. It improves workability, adhesion and strength. As it is chloride-free it is ideal for mortars with embedded metal. EVO STIK EVOSET causes concrete to have a higher ultimate strength after application.

EVO-STIK EVOPLAST is a concentrated liquid waterproofing plasticiser for use with cement mortar mixes for external renderings as an aid in Dry harling, Pebble dashing, Rough casting and similar finishes. The improvement in workability of rendering is made possible by the entrainment of air which greatly reduces the internal friction within the mix between cement & sand particles. The improvement in waterproofing is sufficient to offer long term protection against dampness and driving rain.

EVO-STIK Mortar Plasticiser is a blend of synthetic and modified lignin-based surface active agents without lime. It is designed to improve plasticity and to provide some frost resistance in set mortar.

Evo-Stik Evofix SBR Waterproof Bonding Admixture is a specially modified styrene butadiene co-polymer latex for cement and mortar. It toughens, waterproofs and improves chemical and abrasion resistance of renders, screeds and other cement based mixes. It is recommended for use in effluent tanks, dairies, food factories, fertiliser stores and other demanding situations. Evofix SBR is an excellent all round primer and bonding admixture. 

EVO-STIK General Purpose PVA is an adhesive, primer, sealer and dustproofer that’s suitable for interior use on most building surfaces. When used as a primer, it improves adhesion to porous or difficult surfaces prior to plastering or screeding.

EVO-STIK Ultimate Strength PVA is a highly concentrated adhesive that has been specially formulated to bond, seal and prime in a range of applications.

EVO-STIK EVO-BOND PVA is a ready to use, general purpose adhesive, primer, sealer and dustproofer.

EVO-STIK Waterproof PVA is a general purpose adhesive, primer, sealer and dustproofer that has been specially formulated for use in damp, wet and exterior conditions.